Maintenance Program
Benefits of Maintenance Contracts:
- Two scheduled check-ups per year.
- 10% discount on all service calls, parts, and labor.
- Gives you priority service.
- Increases & maintains efficiency.
- Lengthens equipment life.
- Helps avoid costly breakdowns, and emergency situations.
Heating Inspection (Heat):
- Inspect burners, pilot assembly and sensors. Clean if applicable.
- Safety check heat exchanger for cracks or damage.
- Check and lubricate blower motor and moving parts if necessary.
- Check flue for proper draft. Check for gas and flue leaks.
- Inspect thermocouple.
- Inspect air for burner efficiency.
- Check fan limit controls.
- Check wiring, burners, fan limit, and controls.
- Check condensate drain and pump. Clean if needed.
- Check and clean condensate trap.
- Check thermostat, calibration and operation.
- Check pressure switches.
- Check temperature rise.
- Visual inspection of hot water heater.
- Inspect furnace filter. Replace if needed.
- Inspect air cleaner. Replace media if needed
- Check system operation & evaluate performance.
- Check safety controls, total performance, operating efficiency, and safety of heating system.
- Provide customer with needed repairs & recommendations.
Humidifier Inspection:
- Check & Clean humidifier.
- Replace evaporator pad if needed.
- Oil Motor.
- Check water supply.
- Check drain line, and clean if necessary.
- Inspect operations.
- Provide customer with needed repairs & recommendations.
Cooling Inspection (A/C):
- Check all wiring and connectors.
- Check condensate drain and pump. Clean if needed.
- Check and clean condensate trap.
- Check compressor contactors.
- Inspect furnace filter. Replace if needed.
- Inspect air cleaner. Replace media if needed.
- Check belt and adjust tension.
- Check condenser coil & clean if needed.
- Test voltage and amp draw of compressor.
- Check condenser fan motor.
- Check and adjust thermostat.
- Lubricate all moving parts if necessary.
- Visual check for leaks.
- Check refrigerant.
- Provide customer with needed repairs & recommendations.
Boiler Inspection:
- Check Gas regulator.
- Check Coupler.
- Check Circulator.
- Check Expansion tank.
- Check Pressure gauge.
- Check Relief Valve.
- Check Aquastat.
- Provide customer with needed repairs & recommendations.
Indoor Air Quality Inspection:
- Check Air Cleaner.
- Check Air Filter. Replace is needed.
- Check UV Lights. Replace if needed.
- Analyze areas for mold growth and problems areas. Recommend solution to cure.
- Provide customer with needed repairs & recommendations.